New! HardieLink

Your Source for Online Ordering, Pricing and more for James Hardie products.

Go

Gallery of Homes

See homes from around the country that were built with James Hardie® products.

Go
Quick Tip-

Technical Support / Technical Documents

Manufacturers' Caulk and Sealant Recommendation Sheet S-100B

Issued July 2000

APPLICATION:
General: James Hardie believes it is good building practice to seal the joints to prevent moisture, such as wind-driven rain and snow, from penetrating the wall cavity. Caulking around windows, doors, eaves and trim edges gives added insurance that leaks will not occur. When James Hardie siding products butt into wood-based materials, a 1/8" gap will allow for expansion and contraction of the wood-based product.

Caulks and Sealants: James Hardie recommends the use of caulks and sealants that remain permanently flexible. Look for the words 'permanent flexibility' or 'permanently flexible' written on the label or in the accompanying literature. Allowing caulks to dry for the recommended time will help to prevent paint from flashing and/or cracking over the caulked joint.


© 2014 James Hardie Building Products Inc. All rights reserved.