Green & Sustainable
Enabling green/sustainable projects across the nation.
Resist Mother Nature
Find out how our products protect your home from some of its most common enemies: fire, hail, and hurricanes.
Choose Durability
James Hardie® Siding is designed to last a lifetime. Find out why we offer a 50-year warranty.
|
HardieWrap™ Seam Tape is designed to seal vertical and horizontal seams and small holes in the weather barrier to prevent air and water infiltration.
HardieWrap Seam Tape adheres to most surfaces and continues to perform even in low temperatures. It contains no asphalts, VOCs (volatile organic compounds) or solvents, which can reduce adhesion over time.
Together, HardieWrap™ weather barrier, HardieWrap™ Flashing, HardieWrap™ Flex Flashing and HardieWrap™ Seam Tape form an important part of a home's weather protection envelope to prevent water damage, mildew and energy loss.1
1When products are installed in accordance with relevant AAMA and ASTM standards.
Currently available in Alabama, Arkansas, California, Florida, Georgia, Idaho, Louisiana, Mississippi, North Carolina, Oklahoma, Oregon, South Carolina, Texas and Washington.
Product Specifications
Total Thickness: 3.0 mil
Roll Size: 1 7/8" x 165'
Packaging: Individually shrink-wrapped
Composition: Polypropylene film coated with acrylic adhesive
HardieWrap™ Weather Barrier
10-Year Transferable Limited Product Warranty
Download PDF Version
For U.S.
PDF documents can only be opened by using Adobe Acrobat Reader
1. LIMITED WARRANTY.
James Hardie Building Products Inc. ("Hardie") warrants to a Covered Person (as defined in Section 2) for a period of ten (10) years from the date of installation ("Limited Warranty Period") that HardieWrap™ weather barrier, HardieWrap™ Flashing, HardieWrap™ Flex Flashing and HardieWrap™ Seam Tape (the "Products") will be free from defects in materials and workmanship.
2. WHO IS COVERED.
A Covered Person is an owner of the following structures: a detached one or two-family dwelling, whether it is a single-family home, duplex, or townhouse, a multifamily home, or a light commercial building (each a "Covered Structure") who can provide proof of installation of the Products on a Covered Structure. This Limited Warranty is transferable to subsequent Covered Persons during the Limited Warranty Period.
3. WHAT WE WILL DO.
If, during the Limited Warranty Period, the Products are defective in material or workmanship, Hardie will repair or replace the defective Products. All Products replacements will be Products being manufactured by Hardie at the time of replacement. No substitutions of other Products or those manufactured by other manufacturers are permitted. You will be responsible for any other costs associated with or arising out of repair or replacement and you must reasonably
cooperate with Hardie or its representatives in their efforts to perform their obligations under this Limited Warranty.
4. WHAT IS NOT COVERED.
This Limited Warranty does not cover any damages or defects resulting from or in any way attributable to:
- The improper storage, shipping handling or installation of the Products, including, but not limited to, improper installation of the Products pursuant to
Section 5, improper installation not in accordance with the applicable building code or industry standards, or any deviation from approved construction plans
or project specifications.
- Further processing, modification or alteration of the Products after shipping from Hardie;
- Neglect, abuse or misuse;
- The negligence, gross negligence, or willful misconduct of any third party;
- Acts of God, including but not limited to, tornados, hurricanes, floods, earthquakes, severe weather or other natural phenomena (including, but not limited to, unusual climate conditions);
- Repair or alteration;
- Vandalism or attack by any party;
- Defects in the Covered Structure or a component of the Covered Structure (e.g., window, door, roof or wall system) or selection of any components of the
- Covered Structure, or premature deterioration of the building materials, or nonstandard use or application of the Products;
- Damage from incorrect design of the Covered Structure;
- Foreign objects or agents, including incompatibility of materials;
- UV exposure of the Products in excess of that set forth in the applicable specification sheet.
- Lack of proper maintenance; or
- Any cause other than material or manufacturing defects attributable to Hardie;
5. CONDITIONS OF LIMITED WARRANTY AND WHAT YOU MUST DO.
Warranty coverage under this Limited Warranty shall be subject to the following terms and conditions:
To obtain service under this Limited Warranty, you must provide written notice to Hardie within thirty (30) days after discovering the claimed defect covered by this Limited Warranty and before beginning any permanent repairs. The notice must describe the location and details of the claimed defect and any additional
information for Hardie to investigate the claim. Photos of the Products, showing the claimed defect must accompany the notice.
The Products must be installed in accordance with the applicable HardieWrap Installation Requirements in effect at the time of installation of the Products.
Installation Requirements are available by calling 1-866-4-HARDIE (1-866-442-7343), and online at www.hardiewrap.com.
Upon discovery of a claimed defect, you must immediately, and at your own expense, provide for protection of all property that could be affected until the
claimed defect is remedied if applicable. Before you begin any permanent repair to the Products, you must allow Hardie's authorized agent to enter the property and Covered Structure where the Products is/are installed, if applicable, and examine, photograph and take samples of the Products.
6. LIMITATION OF LIABILITY.
HARDIE'S LIABILITY UNDER THIS LIMITED WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCTS COVERED BY THIS LIMITED WARRANTY ONLY WHEN CAUSED SOLELY BY A DEFECT IN MATERIALS OR WORKMANSHIP AS SET FORTH IN THIS LIMITED WARRANTY. IN NO EVENT SHALL HARDIE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, ANY CLAIMS OF PROPERTY DAMAGE CAUSED BY MOLD OR MILDEW, BASED UPON BREACH OF LIMITED WARRANTY, BREACH OF CONTRACT, TORT, OR ANY OTHER LEGAL THEORY. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation may not apply to you.
7. LIMITATION OF IMPLIED WARRANTY.
ANY IMPLIED LIMITED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
8. ENTIRE AGREEMENT.
ANY IMPLIED LIMITED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE LENGTH OF THIS LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.
9. HOW TO OBTAIN WARRANTY SERVICE.
For warranty services call 1-866-375-8603 or write Warranty Department, James Hardie Building Products, Inc., 10901 Elm Avenue, Fontana, California 92337.
HardieWrap™ weather barrier FAQ
A: HardieWrap weather barrier is a water-resistive barrier, as defined by U.S. building codes. Used in residential buildings, HardieWrap weather barrier is installed over the sheathing, beneath the exterior siding (cladding) to reduce water infiltration and air infiltration, while allowing potentially damaging water to escape from exterior walls.
A: HardieWrap weather barrier is composed of high-performance, non-perforated, non-woven polyolefin with a unique coating for a balance of water holdout and breathability. HardieWrap weather barrier also has superior air resistance and tear resistance compared to the nearest competition.
A: HardieWrap weather barrier meets the requirements for all major building codes, including those as specified in ESR # 2658.
A: In independent tests, HardieWrap weather barrier outperformed its nearest competition in each of these categories: water holdout, air penetration resistance and tear resistance.
A: HardieWrap weather barrier outperforms Grade D building paper (and felt) in each of these categories: water resistance, air resistance, durability and ease of installation.
Back to Top
A: HardieWrap weather barrier is currently (or will be available very soon) in the following roll sizes: 3' x 195', 9' x 100', 9' x 150', 10' x 100', 10' x 150'.
A: The tear strength of HardieWrap weather barrier, according to ASTM D-1117 testing procedure, is 15 lbs. MD and 18 lbs. CD. The breaking strength of HardieWrap weather barrier, according to ASTM D-882 testing procedure, is 59 lbs./in MD and 51 lbs./in CD.
Back to Top
A: HardieWrap weather barrier is 11 mil thick for greater tear strength than the nearest competition.
A: Yes. HardieWrap weather barrier is a water-resistive barrier and has passed ASTM D-779 testing for water resistance. Results from AATCC127 testing procedure show HardieWrap weather barrier's water resistance is >325 cm of water holdout, which is more than 50% higher than the next competition.
A: HardieWrap weather barrier ranks as a Class A fire-rated product in accordance with the International Residential Building Code 2006 and International Building Code 2006, and is tested in accordance with ASTM E-84 testing procedure.
Back to Top
A: HardieWrap weather barrier has a UV stability of up to 180 days (6 months). Ensure that HardieWrap weather barrier is properly stored and handled prior to installation.
A: Yes. HardieWrap weather barrier must be installed with the printed side out for best performance.
A: HardieWrap weather barrier weighs approximately 20 lbs./1000 sq. ft., which equates to less than 30 lbs. a roll.
A: HardieWrap weather barrier is competitively priced. For specific information, contact a James Hardie Representative at 1-866-4HARDIE (1-866-442-7343).
A: HardieWrap weather barrier can be used with any cladding material: fiber-cement, wood, wood composite, brick, stucco and vinyl, as required by local building codes. When installing HardieWrap weather barrier, follow the recommendations of the local building codes and the HardieWrap™ Installation Requirements.
A: Flexible flashings are recommended in accordance with window industry and building code requirements. HardieWrap™ Flashing and HardieWrap™ Flex Flashing are designed as part of the HardieWrap™ weather barrier solution and are installed around window openings and other penetrations. HardieWrap™ Seam Tape is also designed specifically for the HardieWrap weather barrier solution and is used for taping the vertical and horizontal seams to create the complete weather protection envelope. For complete installation instructions, please contact James Hardie Technical Services.
A: James Hardie Building Products, Inc. has a mission to help you build better homes. After pioneering significantly improved siding products, James Hardie saw room for improvement in protecting the building envelope from weather. To that end, James Hardie has created high-performance HardieWrap weather barrier, HardieWrap Flashing, HardieWrap Flex Flashing and HardieWrap Seam Tape. Together, these products work to provide a high performing second layer of defense for your home from a brand you can trust.
A: HardieWrap weather barrier is available at select dealers in Georgia, North Carolina and South Carolina. For further information, please contact James Hardie Building Products.
A: Contact your James Hardie Sales Representative or call James Hardie Customer Service at 1-866-4HARDIE (1-866-442-7343) for more information as to when it will be available in your area.
Back to Top
|
